Jaxon Steel is a leading Jordan-based steel manufacturer and supplier of the highest quality steel products in Amman, Jordan. We deal in Carbon Steel EN-351 Bars and provide durable and high-strength engineering, auto, and industrial solutions Our EN-351 bars are renowned for their outstanding wear resistance, toughness, and hardenability that guarantee impressive performance under extreme conditions. With a passion for quality and accuracy, we serve various industry requirements, providing tailored solutions and assured supply. At Jaxon Steel, we value customer satisfaction, providing top-quality steel products that are aligned with international standards.
Carbon Steel EN-351 consists mainly of Carbon (0.30-0.40%), Silicon (0.10-0.35%), Manganese (0.60-1.00%), Chromium (0.80-1.50%), Nickel (2.00-2.50%), and Molybdenum (0.20-0.35%), which have excellent hardenability and wear resistance. EN-351 bars have good tensile strength (850-1000 MPa), yield strength (600 MPa min), and impact toughness. With a hardness of 250-350 HB, they exhibit good wear and fatigue resistance. Excellent machinability and toughness properties make them best suited for heavy-duty engineering applications, ensuring long life in high-stress environments.
| Grade | EN351 |
|---|---|
| Specification | BS970 1.0904 55Si7 55S6 55Si2Mn ASTM 9255 |
| Round bar size | Diameter: 3-~800mm |
| Hex Bar size | 2-100mm A/F |
| Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Square bar size | 4 to 100mm |
| Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Section | 3.0 to 12.0mm thickness |
| Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Billet Size | 1/2″ to 495mm Diameter |
| Rectangles Size | 33 x 30mm to 295 x 1066mm |
| Finish | Cold (bright) drawn, centreless ground,smooth turned, peeled, slit rolled edge, hot rolled, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| Condition | Hardened & tempered, annealed |
| Technique | EN45 Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Processing | Bar cutting to 650mm |
| Form | EN45 Welding Rod, Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
| Element | En42J |
| C | 0.75 – 0.90% |
| Mn | 0.50 – 0.90% |
| Si | 0/1 – 0.35 |
| S | 0.04% Max |
| P | 0.04% Max |
|
ULTIMATE TENSILE STRENGTH, S. (MPA) |
621 |
|---|---|
|
Modulus of elasticity, E (Gpa) |
204 |
|
Fatigue strength coefficient, of (Mpa) |
948 |
|
Fatigue strength exponent, b |
-0.092 |
|
Fatigue ductility coeffient ,ef |
0.26 |
|
Fatigue ductility exponent,c |
-0.445 |
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
|---|---|---|---|
Cold Drawn and Polish | 3.00 – 75.00 | 1/8″ – 3.00″ | h8-h9-h10-h11 |
Cold Drawn and Ground | 10.00 – 75.00 | 5/6″ – 2.50″ | h8-h9-h10-h11 |
Peeled and Polished | 40.00 – 150.00 | 1.50″ – 6.00″ | h11, h11-DIN 1013 |
Peeled and Ground | 20.00 – 50.00 | 3/4″ – 2.00″ | h9-h10-h11 |
Cut to size on request (tolerance +2/-0 mm). Standard lengths of EN45 Bars 2000 mm up to 6000 mm available
5.0 | 45.0 |
6.0 | 50.0 |
7.0 | 55.0 |
8.0 | 60.0 |
9.0 | 65.0 |
10.0 | 70.0 |
12.0 | 75.0 |
16.0 | 80.0 |
20.0 | 90.0 |
25.0 | 100.0 |
30.0 | 130.0 |
35.0 | 160.0 |
40.0 | 200.0 |
Carbon Steel EN-351 Bars have extensive use in heavy-duty because of high strength, abrasion resistance, and toughness. They are the most suitable products to produce the gears, shafts, crankshafts, axles, camshafts, and rollers used in auto, engineering, and machinery fields. They have application in equipment for mining, construction equipment, and industrial devices, where extreme impact resistance is a requirement. Their better hardenability allows them to be used in heat-treated parts that need endurance in harsh conditions. EN-351 bars are also favored in oil & gas, railway, and defense industries for consistent performance in tough environments.
Yazan Steel is a leading manufacturer, supplier and exporter of high-quality Carbon Steel, Alloy Steel, Mild Steel and Galvanized Steel products. Our extensive product range includes Pipes, Tubes, Flanges, Pipe Fittings, Forged Fittings, Sheets and Plates, catering to various industries in Amman, Jordan.
Copyright 2025 Yazan Steel. All rights reserved
